Katalog
Dlaczego się rejestrować? Tylko po to, by chronić nasz katalog przed botami. Twój email pozostaje prywatny — nigdy go nie udostępnimy ani nie wyślemy niczego bez Twojej zgody. Gwarantujemy to!
| Emitent | Reserve Bank of Australia |
|---|---|
| Rok | 1997 |
| Typ | Pattern or trial banknote |
| Nominał | Zaloguj się aby zobaczyć szczegóły |
| Waluta | Zaloguj się aby zobaczyć szczegóły |
| Materiał | Zaloguj się aby zobaczyć szczegóły |
| Rozmiar | Zaloguj się aby zobaczyć szczegóły |
| Kształt | Zaloguj się aby zobaczyć szczegóły |
| Drukarnia | Zaloguj się aby zobaczyć szczegóły |
| Projektant(zy) | Zaloguj się aby zobaczyć szczegóły |
| Rytownik(zy) | Zaloguj się aby zobaczyć szczegóły |
| W obiegu do | Zaloguj się aby zobaczyć szczegóły |
| Źródło(a) | Zaloguj się aby zobaczyć szczegóły |
| Opis awersu | Zaloguj się aby zobaczyć szczegóły |
|---|---|
| Legenda awersu | Zaloguj się aby zobaczyć szczegóły |
| Opis rewersu | Vignette of the new Parliament House in Canberra rendered in fine intaglio line work at centre, overlaid on a large circular orange and purple guilloche rosette, with architectural elevation drawings in the background. The numeral '5' appears at upper right and the word 'Australia' runs vertically along the left margin. A transparent window with an embossed Eastern Spinebill motif is visible at lower left. |
| Legenda rewersu | Zaloguj się aby zobaczyć szczegóły |
| Podpis(y) | Zaloguj się aby zobaczyć szczegóły |
| Rodzaj zabezpieczeń | Transparent window, Microprinting, Serial number |
| Opis zabezpieczeń | Zaloguj się aby zobaczyć szczegóły |
| Warianty | Zaloguj się aby zobaczyć szczegóły |
| Uwagi |
Australia's polymer notes were the product of decades of joint research between the Reserve Bank and the Commonwealth Scientific and Industrial Research Organisation, with the five-dollar denomination first issued in polymer form in 1992. The P#55A belongs to a later print run and incorporates refinements to the clear window register that had caused minor production headaches in the earliest polymer issues — misalignment between the window cutout and the surrounding print layer was a known fault in some early batches.
Note Printing Australia had by this point licensed the polymer substrate technology internationally, meaning the same manufacturing process used here was already being adopted by other central banks. The domestic note was, in a sense, a demonstration model as much as a circulation piece.